访客留言

Guestbook

电 话
020-36928707
在线客服
外贸业务-Bruce 国内业务-徐小姐 国内业务-闫先生 国内业务-杨先生
地 址
广州市花都区新华街三东大道三东工业区
关注官方微信


联系人姓名
联系电话
联系邮箱
联系QQ
标题
 
内容
 
验证码

留言列表

Guestbook List

L-101 L-101V L-103V L-1063D(白色) 要报价

游客:游客:娓娓道来1970-01-01 08:00

L-101 L-101V L-103V L-1063D(白色) 要报价

游客:娓娓道来1970-01-01 08:00

想做口罩贴我们的品牌,由贵司做代工。

游客:游客:闫少1970-01-01 08:00

想做口罩贴我们的品牌,由贵司做代工。

游客:闫少1970-01-01 08:00

Please see if your product meets these specifications 1. Scope 1.1 Medical device covering the mouth, nose and chin which provides a barrier to minimize the direct transmission of airborne infection in the health care setting. 1.2 To be worn in the proximity of patients with pulmonary tuberculosis. 1.3 A valid NIOSH approval certificate must be attached; the approved product must feature on the NIOSH website. 2. Technical Specification Availability of masks In order to ensure that people with different facial features are afforded adequate protection, two different types of masks are recommended. Construction and Material a) All materials used in the composition of a mask shall be free from latex and glass. b) All materials used to be tested for bio-compatibility and skin irritation. c) The mask shall consist of four layers of non-woven material with No Valve d) The four layers of the respirator shall be ultrasonically bonded to a depth of 8mm. e) The respirator must not to be glued stitched. f) The inner layers to be constructed by using a “wet lay” process. g) The respirator must provide a secure fit (blow-by free) around the mouth and nose. h) Two securing bands to be latex free and constructed of a synthetic elastomeric material of nominal width 5mm. i) The length shall be such that the elastic fits comfortably around the head of the wearer. j) The nose piece/clamp should be made of aluminium with a nominal width of 3mm. k) The nose and mouth piece must be flexible and easily malleable to conform across bridge of nose. l) The foam strip shall be a polyurethane foam strip of width 35mm and 1mm nominal thickness. m) The mask must cater for all facial structures, shapes and sizes ( regular and small) n) The mask must be able to be used under a full face shield o) Filtration efficiency Bacterial filtration (BFE) to be>95%@ 0.3 micron Particle filtration (PFE) to be >95%@ 0.1 micron Fluid resistance should be at 160mm Hg 3. Packaging The packaging must be 50 masks per box, any amendments thereto will invalidate the bid. I am looking at ordering 20 000 pcs Regards Qiniso

游客:游客:Qiniso1970-01-01 08:00

Please see if your product meets these specifications 1. Scope 1.1 Medical device covering the mouth, nose and chin which provides a barrier to minimize the direct transmission of airborne infection in the health care setting. 1.2 To be worn in the proximity of patients with pulmonary tuberculosis. 1.3 A valid NIOSH approval certificate must be attached; the approved product must feature on the NIOSH website. 2. Technical Specification Availability of masks In order to ensure that people with different facial features are afforded adequate protection, two different types of masks are recommended. Construction and Material a) All materials used in the composition of a mask shall be free from latex and glass. b) All materials used to be tested for bio-compatibility and skin irritation. c) The mask shall consist of four layers of non-woven material with No Valve d) The four layers of the respirator shall be ultrasonically bonded to a depth of 8mm. e) The respirator must not to be glued stitched. f) The inner layers to be constructed by using a “wet lay” process. g) The respirator must provide a secure fit (blow-by free) around the mouth and nose. h) Two securing bands to be latex free and constructed of a synthetic elastomeric material of nominal width 5mm. i) The length shall be such that the elastic fits comfortably around the head of the wearer. j) The nose piece/clamp should be made of aluminium with a nominal width of 3mm. k) The nose and mouth piece must be flexible and easily malleable to conform across bridge of nose. l) The foam strip shall be a polyurethane foam strip of width 35mm and 1mm nominal thickness. m) The mask must cater for all facial structures, shapes and sizes ( regular and small) n) The mask must be able to be used under a full face shield o) Filtration efficiency Bacterial filtration (BFE) to be>95%@ 0.3 micron Particle filtration (PFE) to be >95%@ 0.1 micron Fluid resistance should be at 160mm Hg 3. Packaging The packaging must be 50 masks per box, any amendments thereto will invalidate the bid. I am looking at ordering 20 000 pcs Regards Qiniso

游客:Qiniso1970-01-01 08:00

2016亚太(广州)智慧医疗博览会 2016第四届亚太(广州)健康呼吸博览会 将于2016年12月17日-19日在广州(琶洲)保利世贸博览馆举行,希望能邀请贵公司参加我们的展会!

游客:游客:黄庆祥1970-01-01 08:00

2016亚太(广州)智慧医疗博览会 2016第四届亚太(广州)健康呼吸博览会 将于2016年12月17日-19日在广州(琶洲)保利世贸博览馆举行,希望能邀请贵公司参加我们的展会!

游客:黄庆祥1970-01-01 08:00

8条记录/1页1

产品中心

products

联系方式

contact

电 话
020-36928707
在线客服
外贸业务-Bruce 国内业务-徐小姐 国内业务-闫先生 国内业务-杨先生
地 址
广州市花都区新华街三东大道三东工业区
关注官方微信


您好 Say hello.欢迎您给我们提出问题

姓名Name 标题Title 邮 箱Emali 联系电话Tel 内容Content